toro 3100 Cancel The title field is required!

1. Roberts Donald J

   
   5/4/2021 2:05 PM

   i have a toro 3100 that we are using for verticutting and the center reel lost power. It spins when there is no resistance but as soon as it hits the grass it does not have the power to keep spinning the front two seem to still have plenty of torque. Tried swapping the reel motor but  still the same. if any one has any experience with this problem and help would be appreciated 

   
   
   
   
2. David Marabella

   

   16 posts
   
   5/7/2021 8:05 AM in reply to Roberts Donald J

   look at the reel to hy motor adapter. they are plastic and strip out.

   
   
   
   
3. Roberts Donald J

   
   5/11/2021 12:05 PM in reply to David Marabella

   Thank you for your reply. Unfortunately that is the first thing i looked at. I'm thinking it must be in the valve body. but have not nailed it down yet. so any other suggestions are appreciated. hope every body spring is not to stressful. we are just starting to get germination on our greens and will be taking the covers off latter this week!! 

   
   
   
   
4. David Marabella

   

   16 posts
   
   5/11/2021 1:05 PM in reply to Roberts Donald J

   you will need to do a hy pressure test on the pressure side of wheel motor line. to make sure your getting the proper pressure to the hy motor. if you are not getting the right pressure then you triple pump has damage to it. if you are getting the right pressure the you hy motor is bad.