Honda 4" pump Cancel The title field is required!

1. Bradley Frunchak

   

   24 posts
   
   9/13/2021 2:09 PM

   Honda 4" pump has stopped moving water. I have replaced all of the seals. The impeller is turning but it will not bring up any water through the suction line. I have tried 2 different suction lines and still nothing.

   
   
   
   
2. Ron Bradley

   

   63 posts
   
   9/14/2021 6:09 AM in reply to Bradley Frunchak

   Is your impeller plugged up? Or worn out?  Have holes in it?

   
   
   
   
3. Robert Tillema

   

   21 posts
   
   9/14/2021 2:09 PM

   Check input shaft direction, have you changed the drive motor?
   

   
   Commercial Customer Parts & Service Videos
   
   
4. Bradley Frunchak

   

   24 posts
   
   9/14/2021 2:09 PM

   It was working one afternoon when I left. Returned next morning and the pump had lost its prime and all water in the suction and discharge line. Has pumped since. Impeller turning in the correct direction. 

   
   
   
   
5. John Weidler

   

   13 posts
   
   9/16/2021 11:09 AM

   So the pump shaft seal was replaced also after running dry? This is behind the impeller.

   
   
   
   

   Last modified on 16 Sep 2021 16:09 by John Weidler