3/4/2015 10:03 AM
If noise is an issue due to houses, Precision makes a very quite one that does the trick. The installation is easy, just make sure your electrical supply is adequate and whether your single phase or 3 phase at source. the cost for ours was about 12-13 k all in but we did electrical installation as well as fan install. This was in a location where quite operation was critical so we also purchased the VFD to run at lower speeds in the evening and if you need a fan, you need to run it at night, probably more important to run at night than during the day anyway. Makes a huge difference in a challenging micro climate. Good luck and call Andy at Precision, he can help with all the logistics.