par aide 360 degree hole painter Cancel The title field is required!

1. Bradley Ingram

   

   0 posts
   
   5/18/2015 3:05 PM

   Anybody got any tips on using this hole painter? After carefully following the directions, the paint still drips through the hole in the guide and stains the bottom of the cup despite vigorously shaking the can before and during the application. Maybe I'm just old school and am used to the old Hole In White method? Any suggestions would be appreciated. THANKS

   
   
   
   
2. Bester Johannes

   
   5/19/2015 2:05 AM

   I have the same problem,

   
   
   
   
3. David Callanan

   

   0 posts
   
   5/19/2015 4:05 AM

   I use a cheap plastic funnel, cut dow to a size that slips nicely into the cup. The off cut is used on the surface to stop paint blowing out onto the putting surface. Well worth trying

   
   
   
   
4. Matthew Enderson

   

   1 posts
   
   5/22/2015 11:05 AM

   I threw mine in the garbage and bought the Tidy Whitey hole painter. Not a perfect fix but a whole lot better then the 360 hole painter.

   
   
   
   
5. Patrick Reinhardt

   

   0 posts
   
   5/27/2015 2:05 PM

   2 quick blasts with the paint can. Any more and you'll just make a mess. Best painter I have used so far, and much easier for the guys to use than Hole in White.

   
   
   
   
6. Rheinschmidt Branden L

   
   5/28/2015 10:05 PM

   Put a towel in the bottom of the cup before you use the paint

   
   
   
   
7. Whitbeck Nicholas

   
   7/12/2015 1:07 PM

   We have had success painting the hole BEFORE inserting the cup. Zero mess, although you lose a little bit of the vibrant white color due to setting the cup. Helps you move faster and keep your cups clean.