Spray Rig 1250 Toro Cancel The title field is required!

1. Nicolas Davies

   

   0 posts
   
   3/27/2013 9:03 AM

   Gentlemen does anyone have a manufacturer of extended length hand pistol /pole type spray , that you would have attached to a hose reel on your normal spray rig.
   
   We have nearly 600 Date palms which we need to spray frequently and up into the crowns around 4=5 meters high , our existing spray pistol is around 18 inches . Ideally it would need to be made of chemically resistant plastic or aluminium ?
   An extra 30 plus inches would make the job so much easier and more accurate into the crowns .
   
   Any ideas
   
   Nic from Saudi

   
   
   
   
2. Schott Matthew

   
   4/16/2013 11:04 PM

   I've seen a cherry picker attachment for a Workman that would work pretty nicely. Obviously that would cost alot more than what you are really looking for.

   
   
   
   
3. Peter Bowman

   

   11 posts
   
   4/17/2013 7:04 AM

   These might do the trick.....
   
   http://www.udorusa.com/access_diaph_spray_guns.php

   
   
   
   
4. Andy Jorgensen

   

   1 posts
   
   4/17/2013 8:04 AM

   Be careful how long you go. Typically if you have a long section from the trigger to the nozzle, the accumulated product will flow out once the trigger is released. This can be avoided by putting an inline check valve at the tip.
   
   http://www.teejet.com/english/home/products/spray-products/boom-components/teejet--chemsaver--diaphragm-check-valves.aspx