Forum Groups

 

Forums / Shop Talk / Toro5410

Toro5410

2 posts
  1. Craig Stockhaus
    Craig Stockhaus avatar
    0 posts
    4/23/2016 8:04 AM
    I am looking for help with my 5410. I currently cannot get it to lower the front right reel. I can lower it by disconnecting the hydraulic line but it will not go down with the other units at all while the machine is running. It will lift up with the other unit but then it stays up and will not go back down. I have eliminated the lift cylinder do to the fact i hooked the lines up to another port, and it went up and down just fine. I have replace the piston, and check valve in the manifold block as well as all the o-rings. I am looking for any help or ideas would be great.

    Thanks

    Craig Stockhaus
    Golf Course Superintendent
    Lewis River Golf Course
    Woodland Washington



  2. Bob Pruneau
    Bob Pruneau avatar
    5 posts
    4/23/2016 3:04 PM
    Have you tried new hoses or switching them with the left unit and see if the problem follows . Maybe an internal blockage in hose ( rubber lining let go)any binding in the arm bushings .



View or change your forums profile here.