Toro 1250 sprayer flowmeter Cancel The title field is required!

1. Bradley Frunchak

   

   24 posts
   
   9/19/2012 12:09 PM

   I was trying to remove the flowmeter from the sprayer without unhookinh the wire harness. When I pulled the flowmeter out of the housing I pulled the wires out of the harness on the flowmeter side. Now I don't know which wire goes where.
   On the flowmeter side there is
   blue-black-brown
   On the sprayer side is
   greyblack-greyred-grey
   
   Can somebody help me out. The schematic only shows the color of the wires on the sprayer side and not the flowmeter side.

   
   
   
   
2. Robert Tillema

   

   21 posts
   
   9/19/2012 7:09 PM

   Bradley, Will check my 1250 in the morning.

   
   Commercial Customer Parts & Service Videos
   
   
3. Robert Searle

   

   0 posts
   
   9/20/2012 5:09 AM

   Here's what I got. Looks like the sprayer side colors are differnt from yours, but they are labeled "a,b,c". Maybe your 1250 is as well.

   
   
   
   
4. Robert Tillema

   

   21 posts
   
   9/20/2012 9:09 AM

   Bradley,
   My flowmeter looks like the one in the attached photo by Robert Searle.
   The wire colors on mine are, Flowmeter end: Brown which goes to the Blue wire on the spray rig side of the connector; Blue on the flowmeter to the Blue/Purple on the spray rig; and Black on the flowmeter to the Gray wire on the spray rig side.
   
   Hope this helps, check the different wiring pages in the PDF file I emailed to you.
   
   My 1250 is a 2008 model.

   
   Commercial Customer Parts & Service Videos
   
   
5. Bradley Frunchak

   

   24 posts
   
   9/20/2012 9:09 PM

   got it figured out thanks everyone.