Eagle 900 Cancel The title field is required!

1. Stephen Moffitt

   

   0 posts
   
   9/27/2012 8:09 AM

   Does anyone know what would cause a single head on its own station to just come on and run. The box does not show it running and when I power box off it shuts off, then when I turn box back on and after a delay the head comes back on. The system is electrical and not hydraulic and it is a Par+ Controller. Thanks for any help.
   
   Steve

   
   
   
   
2. Grote Richard R

   
   9/27/2012 10:09 AM

   Check for ants in the box. We had the same problem

   
   
   
   
3. Keith Lamb

   

   3 posts
   
   9/27/2012 12:09 PM

   More specifically, Ants in one of the OSM( output station module)units. Power off the clock and pull out the OSM. Top one controls stations 1-8, next 9-16, next 17-24. Look inside to see if an ant or other bug has shorted itself across a station, otherwise replace the OSM. To test it just unplug the station wires on the right side of the OSM and power up. You should be able to hear it click if it is still shorting out, that way the head isn't coming on to test it.