Lf-100 need parts Cancel The title field is required!

1. Diaz Robert E

   
   2/10/2012 11:02 AM

   Looking for hydraulic pump that powers the cutting units not drive wheels.
   Discontinued from jac. and I need one, no seal kits available either.

   
   
   
   
2. Andy Jorgensen

   

   1 posts
   
   2/10/2012 4:02 PM

   Gary @ C&L Equipment - 813-238-0956.
   
   He's currently disassembling a Toro 6500D for a pump for me.

   
   
   
   
3. Diaz Robert E

   
   2/13/2012 9:02 AM

   so your saying that the pumps are simply universal ? Thanks for your reply. 9 degrees w/ 30mph gusts, smiley.

   
   
   
   
4. Andy Jorgensen

   

   1 posts
   
   2/13/2012 9:02 AM

   Robert Diaz said: so your saying that the pumps are simply universal ? Thanks for your reply. 9 degrees w/ 30mph gusts, smiley.

   
   
   Not universal, but he might have what you are looking for. He did for us, again!
   
   We had 22 here in central Florida this morning. Low of 28 and a high of 54 yesterday with a breeze all day. I made it about 100' out of the shop before turning back. Just too cold...

   
   
   
   
5. Keith Lamb

   

   3 posts
   
   2/13/2012 6:02 PM

   Andy Jorgensen said:

   Robert Diaz said: so your saying that the pumps are simply universal ? Thanks for your reply. 9 degrees w/ 30mph gusts, smiley.

   
   
   Not universal, but he might have what you are looking for. He did for us, again!
   
   We had 22 here in central Florida this morning. Low of 28 and a high of 54 yesterday with a breeze all day. I made it about 100' out of the shop before turning back. Just too cold...

   
   
   Andy, you big {This message has been removed in conjunction with GCSAA's forum policies.}
   
   BTW....missed you today.

   
   
   
   
6. Andy Jorgensen

   

   1 posts
   
   2/13/2012 6:02 PM

   Keith Lamb said:
   
   Andy, you big {This message has been removed in conjunction with GCSAA's forum policies.}
   
   BTW....missed you today.

   
   
   
   Aww....thanks man....yeah, I ended up not being able to make it. Too much going on. My assistant was gonna play, then he had something come up. I'm sure it was a good time none the less.

   
   
   
   
7. David Brandenburg

   

   3 posts
   
   2/13/2012 8:02 PM

   If you look around you might be able to find a entire unit with a shot engine for $200 or bucks or so and part out what you need. That's what we did when we needed a wheel motor, took all the parts from it we thought we would use, have 5 spare reels and junked the rest for about $100.
   
   We did not take off the hydro pumps or I would send it to you. We are proudly running a 1989 LF 100. Cuts great, falling apart at the seams though.