3150 rear reel Cancel The title field is required!

1. Joe Brys

   

   4 posts
   
   3/31/2020 9:03 AM

   I have a 3150 GM 04357-250000. The rear reel will not drop at all. It starts to move about a 1/4 inch then stops. It will lower if you lean on the roller though. Coils are all good. Fuses good. valves all good too. Bled a front hydro line just to make sure no air was trapped, and none was. Adjusted the relief an 1/8 as I dont have a test for pressure so dont want to mess with it. Flow control valve was also adjusted to tech specs. Anybody have a clue as to whats going on? There an orfice in the hose/s that Im missing possibly?
   

   
   
   
   
2. Robert Tillema

   

   21 posts
   
   3/31/2020 11:03 AM in reply to Joe Brys

   Does the unit have the rear unit lower adjustment unit? The older units have an adjustment knob, the new units have an adjustment using an Allen wrench. Check this adjustment. Have you tried to lossen the hose fitting and see if the mower will drop. Hope that helps!
   
   
   
   
   

   
   Commercial Customer Parts & Service Videos
   
   

   Last modified on 01 Apr 2020 15:04 by Robert Tillema