Toro 3500-D Deck issues Cancel The title field is required!

1. Stephen Johnson

   

   0 posts
   
   12/16/2013 2:12 PM

   On my 3500-D the decks when in the raised position list severely to the inside. So much so that the front inside caster is on the ground and in fact has become cone shaped. We have replaced bushings in the lift arm assembly checked to make sure the machine and or frame isn't bent adjusted the throw length of the lift cylinder and all of this to no avail.
   If you have any suggestions it will certainly be appreciated.

   
   
   
   
2. Dinger Greg

   
   12/16/2013 4:12 PM

   You don't by chance have aftermarket rear rollers?

   
   
   
   
3. Stephen Johnson

   

   0 posts
   
   12/17/2013 8:12 AM

   To answer Greg's question we have OEM rollers on the rear, but they are worn to the point where they are also cone shaped. Weight distribution due to worn rollers has been brought up as a possible problem.
   
   
   Trying to post picture of mower decks but can't figure it out any suggestions?