12/13/2019 8:12 AM
in reply to
James Smith
Hi James, we have a Sand Devil that we use during aerification. We use it right after the topdressing has had a chance to dry some and then run the Sand Devil over the green and we have seen very good success getting the holes filled with a whole lot less bridging of the holes. The biggest trick to this device is RPMs of the blower. We run at about 1/2 throttle on the blower and that seems to be the right speed. I have had people rev it up higher thinking they were doing good when in reality they were blowing a lot of the sand out of the holes. After going over the green twice, we follow with Sweep N Fill brush and green is done. Hope this helps.
Paul