What kind of adhesive do you use to attach new ferrule? Cancel The title field is required!

1. Brent Venenga

   

   0 posts
   
   11/18/2015 10:11 AM

   What kind of adhesive have you had success with when trying to put a new ferrule on the bottom of a flagstick?

   
   
   
   
2. Clay Putnam

   

   33 posts
   
   11/18/2015 11:11 AM

   I've always used a standard epoxy mix. Can pick it up at any local hardware store.

   
   
   
   
3. Michael Kriz

   

   0 posts
   
   11/18/2015 11:11 AM

   Epoxy
   This year we used the plastic ferrule from R&R that slides on and does not require glue. Surprising they worked so well.

   
   
   
   
4. David Ellison

   

   0 posts
   
   11/18/2015 2:11 PM

   Loctite makes a great 5 minute clear epoxy in a convenient two-part tube that allows you to mix up whatever amount you need. From past experience, you'll get better adhesion if you prep both the flagstick end and the inside of the ferrule with 120 grit sand paper to allow a mechanical groove for the epoxy to set into. Also, make sure to wipe flagstick end and ferrule clean to remove sanding dust.
   
   Good luck!

   
   
   
   
5. James Kizer

   

   0 posts
   
   11/20/2015 4:11 PM

   Gorilla glue

   
   
   
   
6. James Hesselbrock

   

   0 posts
   
   11/25/2015 6:11 AM

   We use the same 2 part epoxy that our golf shop uses to attach club heads to shafts. Works great but not sure of the name.