Toro Osmac troubleshooting Cancel The title field is required!

1. Mark Murphy

   

   0 posts
   
   4/9/2018 3:04 PM

   We brought the system up today. We cannot get any heads to come up from the radios. Also, we are unable to get heads come up at the boxes by toggling the switches. We have power to boxes. The Toro NSN account is 3 months past due, so we have no central control.
   
   Thanks,
   
   Mark

   
   
   
   
2. Jeffrey Whitmire

   

   0 posts
   
   4/9/2018 9:04 PM

   Does your Toro distributor have a field tech? They should be able to help you on a per hour basis.

   
   
   
   
3. Andrew Cross

   

   5 posts
   
   4/15/2018 4:04 PM

   Why do you have no central? You typically buy Site Pro or Lynx with the irrigation system, so you own the software. You just don't get the on demand support and computer replacement. If you can't turn them on at boxes but have power there, check all the fuses. Odd that every fuse would blow but thats where I would look first. Get the volt meter out and check every wire path. Or call in some pros, either through the vendor or someone like Leibold.

   
   
   
   
4. Christopher Boldreghini

   

   0 posts
   
   4/27/2018 10:04 AM

   Possible Mother Board. We had the same issue this spring and that fixed ours.
   
   Charlie B.