Procore 680 needle tine Cancel The title field is required!

1. Brett Lockard

   

   0 posts
   
   7/28/2015 4:07 PM

   We have a new Procore 680 and interested to know what combination of tine diameter, depth, hole spacing and RPMs that you have found successful for periodic needle tining\venting on greens.
   
   Thanks.

   
   
   
   
2. David Stout

   

   0 posts
   
   7/29/2015 11:07 PM

   We use .200 in the winter and .250 during more active growth. Setting d,e, and f alternating depths each time. Rpms slightly lower than full. On both machines we have, each are a little different so I couldn't recommend a specific number but less than full seems to do a better job.

   
   
   
   
3. Jeremy Beech

   

   0 posts
   
   7/30/2015 7:07 AM

   2800 rpm works best