Hunter Surveyor central control system Cancel The title field is required!

1. Nicolas Davies

   

   0 posts
   
   2/14/2013 4:02 AM

   Hi Guys anyone been working with Hunter surveyor Central control system?
   
   We have it and since installation we have never had a month with out issues, partly to do with electrical quality , our MHz fluctuates severely from something like 30 - 60 MHz.
   
   We have combination of G995 and G870/875 heads , run from 32 satellites on nine holes , with extensive landscape on course .
   
   I would be interested in anybodies experience with the Hunter Surveyor system , ours is at best poor .
   
   Our Rain bird by comparison for the community areas seems pretty bullet proof , example a solenoid valve box full of water for months on end due to underground leak , un-detected still had the solenoid with bare wire connections in the water 24/7 and worked without burning out the solenoid .
   
   Rgs Nic from Saudi

   
   
   
   
2. Sam Welch

   

   0 posts
   
   2/14/2013 11:02 AM

   I upgraded from Genesis to Surveyor in 2011 and we've never had an issue. We just retrofit the old Genesis controllers with VSX faceplates and swapped out the software, it's been a great upgrade for us. Our radio communication both with the handheld and between the central and the controllers has greatly improved. I guess that doesn't do you much good, sorry.
   
   I will say that I had full Rain Bird systems with Par+ controllers and Cirrus centrals at my previous two courses and loved them. If I were to build a new system today it would probably be RB (can't speak for Toro).