E-series Osmac Cancel The title field is required!

1. Josh Thomas

   

   0 posts
   
   2/23/2017 11:02 AM

   I have a couple of satellites that will only accept 1 radio command code at a time. If I try to enter a second command or enter a 7540 cancel code it doesn't go through and I have to go to the satellite and turn the box off and restart. The rest of my controllers let me enter multiple commads with no issue. I have changed out pump/common board and decoder module. Any help would be appreciated. Thank you.

   
   
   
   
2. Robert Hall

   

   0 posts
   
   2/23/2017 8:02 PM

   Try toggling back your pump control card from auto to on, and back to auto and on, ect. ect while trying to get multiple commands to be transmitted and see if that clears the interference?
   
   Yankee bob

   
   
   
   
3. Jackson Reiswig

   

   0 posts
   
   3/1/2017 8:03 AM

   Replace the distribution board.