actuator switches on Toro 1200 sprayer Cancel The title field is required!

1. Nowakowski Michael J

   
   6/6/2015 8:06 AM

   Is there any sort of adjustment that can be made to the boom actuator switches on the Toro 1200 sprayer? One switch constantly wants to flip off so when spraying I turn on the main switch that feeds all 3 booms, then quickly push the problem switch down and hold it until I turn off the main switch after a pass. I have checked the manual but can not find any help there, and checked the parts diagram to see if there is a clue but so far have come up empty.

   
   
   
   
2. Andy Jorgensen

   

   1 posts
   
   6/6/2015 4:06 PM

   It's broken. Simple replacement.

   
   
   
   
3. Melvin Waldron

   

   43 posts
   
   6/9/2015 9:06 AM

   Agree with Andy,
   
   Had the same issue last year, replacing the switch fixed it.
   
   Mel

   
   Melvin H. Waldron III, CGCS, Horton Smith Golf Course, City of Springfield/Greene County MO
   
   
4. Bob Pruneau

   

   5 posts
   
   6/10/2015 4:06 PM

   http://golfcoursemechanics.blogspot.ca/ ... p.html?m=1
   
   This might help. Those switches Will arc and contacts get bad . You can get away a few times by just cleaning them up.