Verticut Blades Cancel The title field is required!

1. Tyler Broderick

   

   2 posts
   
   4/16/2014 5:04 PM

   Does anyone have a good supplier for carbide tip verticut blades? I need a new set for my John Deere 8700. JD has the regular blades for 16 dollars per blade, and the carbide are considerable more expensive. R&R has carbide tips for 16 dollars per blade but there is a serial number break and they only supply the blades for the wrong side of the serial numbers for my equipment. The other companies I usually deal with are not useful. Any help would be appreciated.
   
   Tyler

   
   
   
   
2. Keith Lamb

   

   3 posts
   
   4/16/2014 5:04 PM

   dynaBLADE
   http://www.woodbayturftech.com/products/dynablade-verti-cut-blade
   
   dynaBLADE PN: DB0 R12
   Replaces OEM PN: MT6987
   Tip Width: 5/64" (2 mm)
   Heavy Duty Cutting Reels Fairway Mowers 3215, 3215A, 3215B, 3225B, 3225C, 3235A,
   3235B, 3235C, 7700 and 8700
   http://www.woodbayturftech.com/sites/default/files/products/ajax/dynaBLADE_Blade-Chart.pdf
   
   Distributors in Arizona
   
   Aero Equipment Supply
   3161 N. 35th Ave.
   Phoenix, AZ 85017
   United States
   Ph: 602-256-6250, 1-800-585-8776
   http://www.aeroaz.com
   
   
   R & R Products, Inc.
   3334 E. Milber Street
   Tucson, Arizona 85714
   United States
   Ph: 520-889-3593, 800-528-3446
   http://www.rrproducts.com
   
   Other Distributors
   
   
   Precision Small Engine Co., Inc.
   2510 NW 16th Lane
   Pompano Beach, Florida 33064-1505
   United States
   Ph: 954-974-1960, 1-800-345-1960
   http://www.precisionusa.com
   
   
   Eagle One Products
   1340 N. Jefferson Street
   Anaheim, Califiornia 92807
   United States
   Ph: 714-983-0050, 1-800-448-4409
   http://www.eagleonegolf.com

   
   
   
   
3. Tyler Broderick

   

   2 posts
   
   4/17/2014 1:04 PM

   Thanks. After some research and talking to John Deere, what I have learned is that the blades I received from R&R were the wrong blades. Since my bearings and seals were wrong as well, I was thinking that there were two different shafts for the serial number break. Anyway, R&R sent the wrong blades and i ordered the wrong bearings and seals. Problem solved, thanks for the help.