Toro workman 4200 choke Cancel The title field is required!

1. Bradley Frunchak

   

   24 posts
   
   8/20/2012 6:08 AM

   I have a 2006 Toro Workman 4200 that the automatic choke will lose vacuum and close when shifting into second gear or even when sitting stationary and being revved. This causes the machine to bog down and either stall or run extremely rough and slow.
   Toro had replaced the entire carb and choke assembly in June and this helped but the problem is now reoccuring.
   
   Any ideas?

   
   
   
   
2. Matt Falvo

   

   0 posts
   
   8/20/2012 6:08 AM

   There is an adjustment procedure in the service manual for the choke. We have to adjust our machines several times a year to match the temperature changes to keep them running right.
   
   
   Bret Hart
   Equipment Manager
   Turning Stone Resort

   
   
   
   
3. Bradley Frunchak

   

   24 posts
   
   8/23/2012 6:08 AM

   The air temperature has not changed much if any from when Toro changed the carb back in June. So environmental is out.