6/8/2016 10:06 AM
I am having trouble getting my sandpro to start with the key. When the key is turned to start there is no click of the solenoid. I have replaced the solenoid, the key switch, the relay, no change. it seems like the start relay is not closing to kick the solenoid. I don't think its any safety switches as I have bypassed both the seat and neutral switches (for testing purposes).
I can turn the key to run and jump the main posts on the solenoid and it will start and run fine but it wont start with the key.
I am out of ideas and could use some help on what to check next.