SDI spraying system issues Cancel The title field is required!

1. Brandon Crago

   

   0 posts
   
   3/21/2016 12:03 PM

   At the end of last year during my last spray I started having issues with spraying pressure. I assumed my pump was going bad so I rebuilt it during the winter however I am still having pressure issues. Could I be having a hydraulic issue for example a bad hydraulic pump.

   
   
   
   
2. Riley Ryan

   
   3/24/2016 12:03 PM

   What kind of pressure issues? Pressure fluctuation or is the pump not building pressure? What type of rate controller does the unit have on it? It could be a variety of issues ranging from an air leak in the suction line, clogged filters, calibration issues in the computer, improperly working control valve, mis-adjusted valve for the return line and agitation, failed hydraulic system, or possibly a part for the pump failed that you did not replace. If you can give me a call we might be able to pin down the problem a little better 5093590068.

   
   
   
   
3. Brandon Crago

   

   0 posts
   
   3/24/2016 9:03 PM

   Thanks for the reply however it did turn out to be the hydraulic pump on the cushman itself.