Rollers stalling Cancel The title field is required!

1. Kennedy David F

   
   10/24/2013 12:10 PM

   We have a Salsco and a Tru-Turf roller and have been having issues with stalling on both of them. They have Honda engines. They'll idle fine, but will start to stall after roller a couple of greens. They will also stall after 5 minutes if we engage the rollers with the machine up on blocks. We've replaced vented gas caps but still are experiencing problems.
   Any thoughts,
   Dave

   
   
   
   
2. Henry Heinz

   

   0 posts
   
   10/25/2013 7:10 AM

   Check your low oil sensors.

   
   
   
   
3. Craig Stockhaus

   

   0 posts
   
   10/25/2013 12:10 PM

   I had the same problem with my tru turf and found out it was low on oil. Once we filled it up to the proper level it worked like a champ. I would try that, the oil sensors in those engines are very touchy.