John Deere 1500 utility vehicle or Hahn (need brakes) Cancel The title field is required!

1. Gary Twedt

   

   0 posts
   
   3/16/2016 6:03 AM

   Have an old John Deere 1500 utility vehicle (new engine) that needs brakes. John Deere does not support this unit anymore. (It is basically an old Hahn utility vehicle unit.) Did a search for brakes for this unit on the internet...but no luck. Tried to get all new brake system locally from the hub size but could not find any matches. Does anyone have a good line on an aftermarket company that may still get them...or does anyone have an old unit (John Deere or Hahn) laying in the weeds anywhere where I can buy an old unit for parts. Thanks.
   
   I am in Southeast Iowa.

   
   
   
   
2. Ron Bradley

   

   63 posts
   
   3/16/2016 8:03 AM

   I have an old Hahn and had brake issues I found parts at my toro dealer. Hope this helps.

   
   
   
   
3. Gary Twedt

   

   0 posts
   
   3/17/2016 7:03 AM

   Ron Bradley said: I have an old Hahn and had brake issues I found parts at my toro dealer. Hope this helps.

   
   Thanks Ron!!.... I will try Toro.

   
   
   
   
4. Ron Bradley

   

   63 posts
   
   3/17/2016 9:03 AM

   Gary you can also go to Schafer Industries I think that they make the rear axle for the Hahn. They should be
   able to get or help with parts if Toro can't. Good luck.

   
   
   
   
5. Max Lamas

   

   0 posts
   
   3/21/2016 6:03 AM

   Toro, John deere, Jac etc actuallyou make few parts. If you can determine the actual company that made the parts, then contact them. I believe toro bought out hanhs. Like the person before me said; cont act toro. I would never deal with JD because of this. Newer machines usually have new parts and from my experience once 7 years are up, parts are discountined.