2/22/2019 11:02 AM
I would like to know if any one has come across a good reference for a complete parts breakdown for Toro hydraulic motor 112-9200 used on 5410 and GM3150. I have the parts diagram from toro but it only shows a seal kit part number 112-9184. There are other parts that would be handy to have such as the mounting plate as I have three that are broken on one side. I can not purchase just the mounting plate from Toro. Couple questions as well.
1. Who makes this motor for Toro? In the service manual It shows "Sauer-Danfoss cutting reel motors are used on 5210 and 5410" In another section of the service manual it states "Casappa cutting reel motors are used on 5410" The Casappa parts breakdown of seals in the service manual looks the most similar to the unit that I have however when I called a Casappa vendor and gave them a picture of the numbers on the unit and a picture of the unit itself they stated it was not their motor.
2. I replaced one of these motors with a complete unit from R&R. They stated the same seal kit from Toro would rebuild it if it ever needed to be rebuilt. Has anyone verified this. The R&R motor seems much more beefy than the Toro motor.
Thanks for any help
Sean